ABSTRACT
Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)
Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)
Subject(s)
Humans , Female , Middle Aged , Rubber Dams , Computer-Aided Design , Denture Precision Attachment , Digital Technology , Mouth RehabilitationABSTRACT
Abstract In the RLT (Rapid Layer Technology), veneering ceramic and framework are fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) and then cemented to obtain the restoration. This study aimed to evaluate the effect of the thickness of veneering ceramic manufactured by the RLT technique on the fracture resistance (FR) of bilayer crowns with zirconia frameworks. Twenty zirconia frameworks and twenty feldspathic posterior crowns with two different veneering ceramic occlusal thicknesses (1mm=TF1; 2mm=TF2) were manufactured using CAD/CAM system. The specimens were luted to an epoxy resin abutment with resin cement and mechanically cycled (200N and 4.5×105 Pa, 37°C, 2×106 cycles, 3Hz). The FR test was performed (10kN, 0.5mm/min), and the specimens were analyzed in a stereomicroscope. For the stress analysis (finite element analysis, FEA), a 10kN load was equal to the in vitro test, and the principal stress was evaluated. The FR data were analyzed by Student's t-test and Weibull's analysis. The thickness influenced the FR of bilayer crowns. The FR was higher in the TF2 than in the TF1 group. The TF2 group presented the highest characteristic strength compared to the group TF1. The predominant type of failure was delamination. The FEA showed higher stress concentrations below the loading application point at the veneering cement interface in the 1-mm-thick model. The bilayer crowns manufactured using the approach of 2mm of veneering ceramic promoted higher FR compared to the group with 1mm veneering ceramic. Also, the FEA showed that the veneer ceramic thickness has an effect on stress distribution in zirconia-based bilayer crowns.
Resumo Na RLT (Rapid Layer Technology), a cerâmica de cobertura e infraestrutura são fabricados pelo Computer-Aided Design / Computer-Aided Manufacturing (CAD / CAM) e cimentados para obter a restauração. Este estudo teve como objetivo avaliar o efeito da espessura da cerâmica de cobertura fabricada pela técnica RLT na resistência à fratura (RF) de coroas bilaminadas com infraestrutura de zircônia. Vinte infraestruturas de zircônia e vinte coroas posteriores feldspáticas com duas espessuras oclusais da cerâmica de cobertura (1mm = TF1; 2mm = TF2) foram fabricadas usando o sistema CAD / CAM. Os espécimes foram cimentados em preparos de resina epóxi com cimento resinoso dual e ciclados mecanicamente (200N e 4,5×105 Pa, 37° C, 2×106 ciclos, 3Hz). O teste de RF foi realizado (10kN, 0,5mm / min) e, posteriormente, os espécimes foram analisados em estereomicroscópio. Para a análise de tensão (análise de elementos finitos, FEA), uma carga de 10kN foi aplicada igual ao teste in vitro, e a tensão principal foi avaliada. Os dados de RF foram analisados pelo teste t de Student e análise de Weibull. A espessura mostrou forte influência na RF das coroas bilaminadas. A RF foi maior em TF2 do que no grupo TF1. O grupo TF2 apresentou a maior resistência característica em relação ao grupo TF1. O tipo de falha predominante foi a delaminação. O FEA mostrou maiores concentrações de tensões abaixo do ponto de aplicação da carga, na interface cimento e cerâmica de cobertura no modelo de coroa de 1 mm de espessura. As coroas de bilaminadas confeccionadas com 2 mm de cerâmica de cobertura promoveram maior RF em comparação ao grupo com cerâmica de cobertura de 1 mm. Além disso, a FEA mostrou que a espessura da cerâmica de cobertura tem um efeito na distribuição de tensões em coroas bilaminadas à base de zircônia.
Subject(s)
Humans , Dental Porcelain , Dental Veneers , Technology , Zirconium , Materials Testing , Ceramics , Computer-Aided Design , Dental Restoration Failure , Crowns , Dental Stress AnalysisABSTRACT
This study aimed to analyze the shear bond strength (SBS) of ceramic orthodontic brackets bonded with two different adhesive systems to intact and eroded teeth. Ceramic brackets were bonded to 72 bovine central incisors divided into four groups, defined by two study factors: enamel condition (control group, kept in artificial saliva; and experimental group, eroded by using immersion cycles in Coke™ for 90 seconds, every six hours for five days), and adhesive system type (Transbond™ XT or Transbond™ Plus Color Change). Polycrystalline ceramic brackets were adhesively fixed on all specimens using the same light curing protocol. SBS was tested using 0.5 mm/min and the failure mode was classified. SBS data was analyzed using two-way ANOVA followed by Tukey test. The adhesive remnant index (ARI) scores were analyzed using Kruskal-Wallis test with Dunn's post-hoc pairwise comparison (α=0.05). Percentages of ARI scores between the groups were compared by Fisher's exact test. Spearman's correlation coefficient was applied to investigate the correlation between ARI scores and SBS values. Only the adhesive system factor had significant effect on SBS (p=0.014), Transbond™ Plus Color Change showing higher values. No significance was found for enamel condition (p=0.665) or the interaction between adhesive system and enamel condition (p=0.055). ARI scores frequencies differed between groups (p<0.001). The median ARI scores were statistically different for most comparisons among the groups. However, no significant correlation was found between ARI scores and SBS. In conclusion, the type of adhesive system affected the SBS of ceramic brackets to dental enamel, but the enamel condition, intact or eroded, had no significant effect. There was no correlation between ARI scores and SBS values, although eroded enamel tended to retain more adhesive after bracket removal.
Subject(s)
Tooth Erosion , Orthodontic Brackets , Dental CementsABSTRACT
Abstract The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.
Resumo O objetivo deste estudo foi avaliar in vitro a influência do extrato de gengibre 20% na resistência adesiva de pinos de fibra de vidro cimentados com cimentos resinosos convencional ou autocondicionantes. Quarenta e oito raízes bovinas foram padronizadas (17±0.5mm) e aleatoriamente divididas em dois grupos (n=24), de acordo com o irrigante utilizado durante o preparo biomecânico: NaOCl: hipoclorito de sódio 1%; e GEN: extrato glicólico de gengibre 20%. Os canais radiculares foram preparados e aleatoriamente distribuídos em dois subgrupos (n=12), conforme o protocolo de cimentação: autocondicionante (RelyX U200) e convencional (RelyX ARC). Após 48 h, as raízes foram seccionadas perpendicularmente (4 no terço cervical e 3 no terço médio) e submetidas ao teste de resistência adesiva push-out (50 kgf carga, 1.0 mm/min). O modo de falha foi analisado em MEV e estereomicroscopia. Os dados foram analisados pelos testes ANOVA 3-fatores e Tukey (p<0.05). ANOVA mostrou que não houve diferenças significativas entre U200 (2.01±0.17)B e ARC (1.93±0.12)B no grupo GEN, e no terço cervical para ambos os irrigantes (2.69±0.16A and 2.54±0.17A, respectivamente). O terço médio apresentou menor resistência adesiva que o terço cervical, independente do irrigante. Em geral, o terço cervical, independentemente do irrigante empregado, e a associação entre NaOCl e ARC apresentaram melhores desempenhos adesivos.
Subject(s)
Animals , Cattle , Ginger/chemistry , Glass , Materials Testing , Plant Extracts/pharmacology , Post and Core TechniqueABSTRACT
Objective: The aim of this study was to evaluate the internal and marginal adaptation of inlays fabricated from different types of impressions (conventional and digital) and different ceramics (feldspathic and lithium disilicate). Material and Methods: Forty premolars were prepared for all-ceramic inlay restoration and assigned to 4 groups (n=10), according to the impression method (conventional with addition silicone and digital impression) and ceramic type (lithium disilicate and feldspathic ceramic blocks). For each type of impression, 10 inlays were milled from lithium disilicate blocks and the other 10 from feldspathic ceramic blocks in a CAD-CAM facility. The internal adaptation was analyzed by the replica technique. The marginal fit was analyzed under a stereo microscope by directly measuring the gap formed between the inlay and the tooth in the proximal and occlusal regions. Results: The marginal or internal adaptations were not affected by type of impression (conventional = digital impression), irrespective of the ceramic type. Only the internal adaptation was affected by the material type, i.e., feldspathic ceramic had lower values than lithium dissilicate ceramic, when considering the digital impression. Conclusion: The conventional and digital impressions promoted similar marginal and internal adaptation for feldspathic and disilicate ceramic inlays. For the digital impression the feldspathic inlays showed better internal adaptation than lithium dissilicate inlays. (AU)
Objetivo: O objetivo deste estudo foi avaliar a adaptação interna e marginal de inlays confeccionadas a partir de diferentes tipos de moldagens (convencional e digital) e diferentes materiais cerâmicos (feldspática e dissilicato de lítio). Materiais e Métodos: Quarenta pré-molares foram preparados para inlay totalmente cerâmica e distribuídos em 4 grupos (n = 10) segundo o método de moldagem (convencional com silicone de adição e moldagem digital) e tipo cerâmica (dissilicato de lítio e blocos de cerâmica feldspática). Para cada tipo de moldagem, 10 inlays foram confeccionadas a partir de pastilhas de dissilicato de lítio e as outras 10 de blocos de cerâmica feldspática, por meio do sistema CAD-CAM. A adaptação interna foi analisada pela técnica da réplica. O ajuste marginal foi analisado com estéreo microscópio medindo diretamente o espaço entre a inlay e o dente nas regiões proximal e oclusal. Resultados: As adaptações marginais e internas não foram afetadas pelo tipo de moldagem (convencional = impressão digital), independentemente do tipo de cerâmica. Somente a adaptação interna foi afetada pelo material, sendo que a cerâmica feldspática apresentou menores valores que a cerâmica de dissilicato, considerando a moldagem digital. Conclusão: As moldagens convencional e digital promoveram adaptação marginal e interna semelhante de inlays de cerâmica feldspática e dissilicato testadas. Para moldagem digital, a cerâmica feldspática mostrou melhor adaptação interna do que a dissilicato de lítio (AU)
Subject(s)
Dental Impression Technique , Dental Marginal Adaptation , Inlays , Metal Ceramic AlloysABSTRACT
This study evaluated the cleanliness of post space after different irrigation protocols, associated or not to the use of ultrasound. Thirty-six single-rooted bovine roots were instrumented with rotary system, irrigated with 1 % hypochlorite and filled with Ah Plus sealer and gutta-percha cones. After seven days in stove at 37 °C, two-thirds of canal filling was removed by drilling and the post space preparation was irrigated with 2.5 % NaOCl (group NaOCl); 0.2 % chlorhexidine (group CLX); distilled water (group Water); 2.5 % NaOCl + ultrasound (group NaOCl-US); 0.2 % chlorhexidine + US (Group CLX-US); or water + US (Group Water-US). Roots were cleaved in mesiodistal direction, prepared for scanning electron microscope (SEM) to evaluate the smear layer and debris presence and for energy dispersive spectroscopy (EDS) analyses, to evaluate chemical components of dentin after treatment. The data were subjected to statistical analysis (two-way Anova and Tukey's test 5 %). EDS analysis showed the presence of chemical components of filling material in the samples from all groups. SEM images showed large amount of obliterated dentinal tubules. The use of ultrasound influenced the removal of some components of filling material (p<0.05), but not allowed for total cleaning. It was concluded that none of the irrigating solutions, associated or not to the use of ultrasound were able to completely clean the post space.
Este estudio evaluó la limpieza de la preparación para el espacio de los postes después de diferentes protocolos de irrigación, asociados o no al uso de ultrasonido. Treinta y seis raíces unirradiculares de bovinos fueron instrumentados con sistema rotatorio, irrigadas con un 1 % de hipoclorito y rellenadas con el sellador Ah Plus y conos de gutapercha. Después de siete días en horno a 37 °C, dos tercios de la obturación del canal se removió por perforación y la preparación del espacio para los postes fueron irrigadas con 2,5 % de NaOCl (grupo NaOCl); Clorhexidina 0,2 % (grupo CLX); agua destilada (grupo agua); 2,5 % NaOCl + ultrasonido (grupo NaOCl - US); 0,2 % de clorhexidina + US (Grupo CLX - US); y agua + US (grupo Agua - US). Las raíces se cortaron en dirección mesiodistal y se prepararon para el microscopio electrónico de barrido (MEB) con el fin de evaluar el barrillo dentinario y la presencia de restos; así como mediante el análisis de espectroscopía de energía dispersiva (EDS) para evaluar componentes químicos de la dentina después del tratamiento. Los datos fueron sometidos a análisis estadístico (pruebas ANOVA de dos factores y de Tukey al 5 %). El análisis EDS mostró la presencia de componentes químicos del material de relleno en las muestras de todos los grupos. Imágenes del MEB mostraron gran cantidad de túbulos dentinarios obliterados. El uso de la ultrasonido influyó en la eliminación de algunos de los componentes de material de relleno (p <0,05), pero no permitió la limpieza total. Se concluyó que ninguna de las soluciones de irrigación, asociadas o no a la utilización de los ultrasonidos fueron capaces de limpiar completamente el espacio para los postes.
Subject(s)
Animals , Cattle , Root Canal Irrigants , Post and Core Technique , Dentin , Endodontics/methods , Therapeutic Irrigation/methods , Pit and Fissure Sealants , Spectrometry, X-Ray Emission/methods , Ultrasonics , Microscopy, Electron, Scanning/methods , Analysis of VarianceABSTRACT
To determine the time required for pH buffering by saliva after use sugary(S), sugar-free (SF) and probiotic (P) chewing gums.Material and Methods:Saliva was collected from 12 volunteer dental students at UNESP São José dos Campos / SP, in order to determine salivary flow (SR) rate and initial buffering capacity (BC). Participants presenting BC>4.0 were invited to continue the research. Participants chewed different types of gum for 3 consecutive days, and saliva was collected at 0-1min, 1-5min, and 5-10min intervals. The time required to neutralize saliva pH after chewing the different types of gum was analyzed by RM ANOVA and Tukey's test (5%).Results:RM ANOVA revealed significant influence on the interaction effect (chewing gum and time) (statisticFdf(4.66)= 4.027, p = 0.0055 <0.05). According to TukeyÆs test, differences were observed in the following circumstances: for the 0-1 interval, BC of S differs from SF and P; BC of S differs from SF at 1-5 min and 5-10 min intervals; and, 0-1min interval differs from 1-5 min and 5-10 min intervals for both S and SF. Conclusion:Dentistry students showed no increased predispositionto dental caries with a specific type of chewing gum. Although time for pH recovery differed according to gum type, they were all above the critical range for enamel demineralization...